Hi Guys,
I'm trying to upgrade ESXi 6.0 to ESXi 6.5 on Dell R715 using Dell Customized image, but it showing Incompatible as there's conflicting VIBs which I'd need to remove first.
The upgrade contains the following set of conflicting VIBs:
Micron_bootbank_scsi-mtip32xx-scsi_2.4.10-1OEM.500.0.0.472560
Brocade_bootbank_scsi-bfa_3.2.1.0-1OEM.500.0.0.472560
Brocade_bootbank_net-bna_3.2.0.0-1OEM.500.0.0.472560
Brocade_bootbank_net-bna_3.2.0.0-1OEM.500.0.0.472560
VMware_bootbank_net-qlge_2.0.0.54-1vmw.500.0.0.472560
Brocade_bootbank_scsi-bfa_3.2.1.0-1OEM.500.0.0.472560
VMware_bootbank_net-qlge_2.0.0.54-1vmw.500.0.0.472560
Micron_bootbank_scsi-mtip32xx-scsi_2.4.10-1OEM.500.0.0.472560
Is there a way to find out if there VIBs are in use before I remove them? NIC list command shows the below output.
[root@esx1:~] esxcli network nic list
Name PCI Device Driver Admin Status Link Status Speed Duplex MTU Description
------ ------------ ------ ------------ ----------- ----- ------ ----------------- ---- ------------------------------------------------------------
vmnic0 0000:01:00.0 bnx2 Up Up 1000 Full 9000 QLogic Corporation QLogic NetXtreme II BCM5709 1000Base-T
vmnic1 0000:01:00.1 bnx2 Up Up 1000 Full 9000 QLogic Corporation QLogic NetXtreme II BCM5709 1000Base-T
vmnic2 0000:02:00.0 bnx2 Up Up 1000 Full 9000 QLogic Corporation QLogic NetXtreme II BCM5709 1000Base-T
vmnic3 0000:02:00.1 bnx2 Up Up 1000 Full 9000 QLogic Corporation QLogic NetXtreme II BCM5709 1000Base-T
vmnic4 0000:06:00.0 bnx2x Up Down 0 Half 1500 QLogic Corporation NetXtreme II BCM57710 10 Gigabit Ethernet
Regards,
Mobin